Brakes/Levers/Pads

The RRL SR transcends the ages by offering a race quality lever without an integrated shifter. The classic styling trademarked by heroes of decades past make this a stylish lever for single speeds, fixed gear or custom applications. Th ergonomically shaped lever is drilled to enhance beauty while reducing weight. Hoods are flat and textured for enhanced grip. A built-in push button quick release system provides cable slack for quick wheel removal or additional tire clearance when conditions get muddy. SPECIFICATIONS - RRL SR - Available with gum or black hoods. - Pull ratio compatible with Spyre and road/cyclocross rim brakes - Sold as a set (left and right)

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel

The forged aluminum Spyke Levers have all the features you would expect from TRP: the ergonomic 2-finger design, Teflon bushings, forged clamp, and return spring. Mated to our Spyke calipers, these levers connect rider and machine for near-telepathic braking feel. - Lightweight design - Ergonomic lever design - Alloy lever and bracket - Teflon bushings - Stainless steel hardware - 2-finger lever blade - For use with RapidFire shifters - Weight: 156g/pair

The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

The T980 is our refined direct mount road caliper. We’ve shaved weight and sculpted a caliper that has beautiful flowing lines, sure to complement your gallant steed. SPECIFICATIONS - T980 - Direct Mount mechanical rim brake designed to be mounted on the fork or seat stays - CNC Alloy Brake Arms - In-place adjustable CNC road cartridge pad holders - Brake Centering Adjustment - Weight: 177 grams per caliper - Fits rim widths 21-28mm - Sold individually

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

- Exceptional heat management - Rounded edge - UCI approved for road competition - Disc Diameter: 220mm - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

- Optimum Heat dissipation - Reliable performance from Cyclecross to Downhill - High durability, even in the toughest conditions - UCI approved for road competition - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

- Optimized for Race Pads - Optimum heat dissipation - High durability - Wear indicators - Rounded edge - UCI approved - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Steel - Disc Technology: 2-piece design

These powerful 4-piston brake sets instill greater downhill confidence and control with a 20% increase in braking power over current 2-piston BR-MT400 brakes. The BR-MT420 calipers feature consistent braking performance and reliable stopping power in all weather conditions. Additionally, they feature a sleek design inherited from MTB racing components.

Shimano BR-MT520 4-piston hydraulic disc brake calipers offer rapid initial pad contact as well as controllable power modulation. The caliper features a wider contact area using dual-diameter opposed pistons for highly-responsive braking power and greater control. - Master cylinder design is sleek and durable - Includes metal pads

BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT410 - Long-lasting performance and quick - Easy installation and adjustment - Superior modulation gives you the power you need - Quick piston retraction - Lightweight 2-piston disc brake caliper - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system

BL-M6100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-M6100 - Pre-assembled - One-way bleeding system - Superior modulation gives you the power you need at low weight - Quick piston retraction - Lightweight 2-piston disc brake caliper - ICE TECHNOLOGIES - Without rotor and adapter

BR-M6120 - Pre-assembled - One-way bleeding system - Superior modulation gives you the power you need at low weight - Quick piston retraction - High power 4-piston disc brake caliper - ICE TECHNOLOGIES - Without rotor and adapter

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

With a focus on reduced weight and cross-country tuned stopping power, the Shimano Deore XT BL-M8100 levers provide intuitive modulation so that you can explore your limits with confidence. They feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional contact point. - 10% stiffer than previous generation M8000, even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers

With a low-profile Flat Mount design, the Shimano GRX BR-RX400 hydraulic disc brakes provide greater control for mixed terrain riding. - Excellent heat dissipation - Flat mount - Convenient tool access - Simple wheel replacement - Easy and clean bleeding system - Never hesitate to tackle rough surfaces - Simple set up and maintenance

With a low-profile Flat Mount design, the Shimano GRX BR-RX810 hydraulic disc brakes provide greater control for mixed-terrain riding. - Excellent heat dissipation - Flat mount and anti-mud specification - Convenient tool access - Simple wheel replacement - Easy and clean bleeding system - Simple set up and maintenance

The Shimano GRX BL-RX812 in-line brake lever delivers greater rider control for mixed-terrain riding thanks to Shimano's category-leading hydraulic disc brakes. The hydraulic disc sub brake lever offers reliable and accessible braking in more positions and allows for quick access while riding upright on the tops of the handlebar. - Quickly brake when riding upright - More confident and accessible braking from multiple positions - Less fatigue on long tours

- Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 140mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 96g

- Shimano's flagship disc brake rotor. Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - The inner aluminum surface of the FREEZA fins is covered with heat-dissipating paint. Providing even more colling performance to reduce brake fade. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 140mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Disc Rotor Weight: 96g

Shimano's flagship disc brake rotor. Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - The inner aluminum surface of the FREEZA fins is covered with heat-dissipating paint. Providing even more colling performance to reduce brake fade. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 114g