Write a Review

- ComfortRide dual-density foam offers plush support - Vacuum sealed water-resistant SVT Cover - NiteSite reflective accents - FullCut Relief Zone

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

Replacement lower hardware for Rockshox forks.

The Ritchey Classic Rizer handlebars are a refined version of its high-performance predecessors featuring a classy high-polish silver finish.

The ZEB is built with a stout, 38mm chassis and features the updated DebonAir spring with the performance of the Charger R damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New, price point Charger R cartridge damper featuring an easy-to-adjust damper with just rebound adjustment - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

Coil Fans Rejoice! Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in. - ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with aluminum legs - Externally adjustable low-speed compression spring preload and rebound - Includes removable bolt-on fender - 2.6 max tire width - 223mm max rotor diameter

Do you live an active lifestyle? On longer bike rides you value the best seating comfort? Then the ergonomic Ergon SF Women Sport Gel saddle should not be missing from your bike! Our new fitness saddle ensures that your cycling enjoyment is not clouded by saddle problems. A perfect balance of sportiness and comfort, the SF Women Sport Gel distributes pressure evenly, which is an added bonus on longer rides. To avoid the common female discomforts and numbness, the anatomically adapted relief channel in the center of the saddle removes pressure from the sensitive soft tissue areas. In addition, the shape and high-quality padding of the saddle are adapted to the position of the upper body during sporty cycling and provides optimum support of the sit bones. - Aids in achieving your fitness goals - Prevents female discomforts and numbness - Sporty and comfortably padded

When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

The Magura hydraulic brake pressure/motor cut-off switch is specifically designed to control functions such as the on/off features of the lights and motor cut-off on your e-bike. - Pressure switch is supplied with all necessary barbed connections (barbed fittings, shroud nuts, olives) - For use with front or rear brake - Compatible with Magura MT disc brakes and HS brakes (all models 2014+)

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

- The result of extensive anatomic study of ladies' saddles - Gel Flow features gel around the anatomic central relief area for maximum comfort - Shock-absorbing technology is used between the rails and the shell, which dampens vibration and helps absorb road shock - Leather top, perforated leather gel area covers - Manganese 7mm rail combines strength and affordability - 300g (135mm) / 310g (160mm)

Box One Single-Speed Aluminum Cogs are 7075-T6 aluminum alloy. It's designed to fit Shimano compatible cassette hubs and has a 5mm wide inner base, giving a more solid interface with the cassette body. The alloy cogs are anodized black with laser-etched graphics. FEATURES - Shimano Compatible Driver - 7075-T6 Alloy - 3/32" or 1/8" Chain Compatible - Lightweight SPECIFICATIONS - Material: 7075-T6 Aluminum - Process: Laser-etched logos Weight - 13t: 8 grams / 0.3 ounces - 14t: 11 grams / 0.4 ounces - 15t: 13 grams / 0.5 ounces - 16t: 14 grams / 0.8 ounces - 17t: 16 grams / 0.6 ounces - 18t: 18 grams / 0.65 ounces

Hope Brake Lever Parts

The M2 lever works with a single cable or Odyssey's dual cable system. - Includes M2 dual cable, double cable coupler and single cable coupler - Replaceable hardware to eliminate stripping

FSA Mega Exo Small Parts.

Chunky XXL 8.25” are over 60% longer than standard grips! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- Crank Boot Compatible Axles - Full Anodized Finish - 12mm Thin—Massive 11x11cm Platform - Cold Forged Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Chamfered Side Edges for Improved Cornering Clearance - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - 18 Adjustable Pins per Pedal - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

- Traditional compact road bar available in multiple widths - Flattened aero top section for enhanced comfort and grip - AL6061-T6 alloy construction - ISO-Road safety certified

For bikes with press-fit head tubes, the Ritchey Comp Press Fit headset stands out above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. The upper bearing is a sealed cartridge, while the lower bearing is coated in titanium. - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Lower Fit (S.H.I.S.): ZS44/30, ZS55/40, ZS55/40 - Lower HT OD/ID: 50/44, 61/55, 61/55 - Material: CroMo - Top cap: 7.3 or 12.4mm - Upper Bearing: Sealed cartridge - Lower Bearing: Ti coated, sealed cartridge - Weight: 83g (7.3mm), 103g (12.4mm)

The Shimano 105 R7020 Dual Control Levers bring the all condition confidence of hydraulic disc brakes and refined ergonomics to the quick and intuitive shifting cyclists expect from Shimano. Features: - Great ergonomics cascaded from ULTEGRA - Greater reach adjust range - Redesigned internal shifting unit - Greater rider control in all conditions - Quick and intuitive rear shifting operation - Same light shifting operation as top tier systems - Lighter front shifting when paired with FD-R7000 (compared with previous generation)

The 710 Tour and Travel Grip features a well thought-out shape, with the wings pulled down far, making the perfect combination of comfort and driving dynamics. The 710 user is a comfort-oriented mountain biker or a sporty trekking biker. This relief wing, which is located at the very edge and deeply extends downwards, frees up space for securely grasping the grip body in all situations. The raised end of the grip externally nestles against the side of the hand, while the inside is somewhat more elevated. As a result, it specifically relieves the ulnar nerve, the median nerve, and the carpal tunnel. The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 238 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend

Selle SMP's Dynamic saddle keeps you moving on those long rides. The patented dropped nose design and large open center channel eliminate pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life the and light padding keeps things comfortably light. Plus, the long rails provide ample fore/aft adjustment for the perfect fit.

absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

- 2-sided clipless pedal ideal for BMX and gravity use - SX features fixed front springs for unparalleled spring tension eliminating unclipping under maximum load - Small platform extruded and CNC machined aluminum body - Sealed 686zz bearing and IGUS

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits Yeti Bikes: - 160E - Arc - SB120 - SB140 MY23+ - SB160 Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.